Designed for Q1000 / Q1200 models
The Weber Flame iQ is a flame safeguard system with unique patented technology, designed especially for use with a Weber Baby Q. Good news for all Weber Baby Q (Q1000 / Q1200 Classic 2nd Generation) owners, the Flame iQ is retrofittable, so there's no need to part with your much loved BBQ to benefit from its unique features.
Once fitted and in use, the Flame iQ continuously senses for a flame at the burner of your Baby Q. It offers convenience and peace of mind. With its built-in reignition functionality, your food will still be cooked to perfection if the flame is blown out and can be successfully reignited. In the case of 3 unsuccessful reignition attempts, its lockout mode activates to shut off the gas supply to the burner.
Features:
Retrofittable
The Flame iQ flame safeguard system can be retrofitted by the user, so there's no need to part with your existing Baby Q (Classic - 2nd Generation) to benefit from its unique features.
Continuous flame monitoring
Once fitted and in use, the Flame iQ continuously senses for a flame at the burner of your Baby Q.
Built-in reignition sequence
With the built-in reignition sequence, your food will still be cooked to perfection if the flame is blown out and can be successfully reignited.
Safety lockout mode
In the case of 3 unsuccessful reignition attempts, its lockout mode activates to shut off the gas supply to the burner.
Intuitive indicator lights
The indicator lights on the Flame iQ control panel make it easy to see what's happening in your barbecue, without lifting the lid.
Maximum pre-set run time
The Flame iQ will automatically cut the gas supply to your Baby Q after 8 hours of continuous run time - a real gas-saver if you forget to turn your Baby Q off after use!
Compliance with AS/NZS 5263.1.7:2020
The Flame iQ meets the requirements of the Australian & New Zealand Standard for Outdoor Gas Appliances for barbecues connected to the piping on a caravan or boat.
Specifications:
- Out Of Carton Dimensions: 16cm H x 16cm W x 11.5cm D
- Fits Q1000 / Q1200 - Classic 2nd Generation models
- Warranty: 3 year limited warranty
- Requires a power supply – supplied with a 1.0 metre 240 V cable and a 2.4 metre 12 V cable IP44 rated – suitable for outdoor use
- Meets the requirements of AS/NZS 5263.1.7:2020 (Gas appliances: Domestic outdoor gas cooking appliances)
Package includes:
- Flame iQ flame safeguard system
- Owner's Guide
- 2 x spanners
- Gas hose NOT INCLUDED
FAQs
Why does the Flame iQ® need to be connected to a power source?
The Flame iQ requires a power source (either 12 V or 240 V) to power the built-in electronics. The electronics power the lights on the control panel, the electronic solenoid to open and close off the gas supply, and the reignition sequence functionality. You cannot operate a Flame iQ without a power source.
Can I use the Flame iQ® on other barbecues within your range, or other barbecue brands?
The Flame iQ has been specifically designed for use on Weber Baby Q (Q1000 / Q1200 Classic 2nd Generation).
It also fits Baby Q Classic 1st Generation (Q100 / Q120). Please note that the updates to the AS/NZS 5263.1.7:2020 standard are not retrospective, so do not apply to these barbecues.
It cannot be retrofitted to other barbecues (Weber or other brand).
Will the Flame iQ® impact the performance of my Baby Q?
No, the Flame iQ does not impact the flow of gas to your barbecue, and does not impact the performance of your barbecue. If you are concerned about the performance of your barbecue, refer to the troubleshooting information in your Owner's Guide.
Does the Flame iQ® need to be installed by a gas fitter or plumber?
No, the Flame iQ does not require installation by a plumber or gas fitter. The Flame iQ comes with clear instructions for installation, usage and how to conduct a gas leak test post installation.
Do I need a new gas hose when I fit a Flame iQ®?
If you are connecting your Weber Baby Q with Flame iQ fitted to the plumbed LP connection of a caravan of boat, or to any other LP plumbed gas supply, you'll need to purchase a bayonet hose. If you are using your Weber Baby Q with Flame iQ fitted to an LP gas cylinder, you can use the hose supplied with the barbecue.
